LIAN LI LANCOOL 216 E-ATX PC Case, Airflow Focus RGB Gaming Computer Case with All-Around Mesh Panels, 2x160mm & 1x140mm PWM Fans Pre-Installed and Innovative Rear PCIe Fan Bracket Chassis (white)
The Lian Li LANCOOL 216 bag has the following amazing characteristics:
- ATX case
- Glass cover
- white
- There are two 320mm RGB fans in the front and a 140mm output fan.
Supports 360 radiators on the top and front and a maximum of 10 fans
Air cooling
Set higher, the motherboard leaves space above the PSU shroud for wider fans.
About the bag:
- CIE fan bracket
The GPU placed at the top of the expansion slots in air-cooling mode opens up the possibility of adding a 120mm fan at the back of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled modes. The additional 120mm fan provides better GPU cooling and greater intake/exhaust balance for the system.
- harmonic
The PCIe expansion slot plate can be rotated to install GPUs vertically, only an additional riser cable is required.
- storage
Up to 6 x SSD + 2 x HDD storage capacity
A total of 2 x 3.5" + 6 x 2.5" drives can be installed with dedicated holders for storage.
- Cable management
LANCOOL 216 provides multiple options for easy cable management. Along the cable grommet strip, 3 large Velcro straps can hold 2 different sets of cables. There are 3 small clips along the back side panel, perfect for routing the 8pin CPU cable cleanly, and there are 2 additional Velcro strips near the PSU chamber to help squeeze the length of the extra PSU cable out of the vent path into the bottom chamber.
- ARGB controller and USB module
An additional ARGB controller and USB module can be mounted on the side of the front panel to provide better control of the front ARGB fans. The ARGB controller and USB module provide the option to create custom lighting patterns by mixing the lighting effects of the two LED channels individually
- Removable top radiator bracket
The top mounting bracket can be completely removed from the case to make hardware installation easier. The mount comes with a left side frame bar to provide optimal clearance.
Two notches have been implemented to allow fan cables to easily pass into the second chamber of the case, which simplifies cable management and makes the overall appearance of the build better.
- Pressure leak free
Pre-installed at the front of the top radiator bracket, a sealing plate ensures no pressure leaks occur when installing fans smaller than the 360/3 x 120mm radiator on top.